Saeco aulika SUP040 Betriebsanleitung Seite 25

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 56
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 24
• 25 •
Machine Installation - Service Provider Manual
2
Slowly pour the co ee beans into the hopper.
If the water tank is not inserted, check that no cof-
fee beans fall into the tank compartment. If this
happens, remove them to avoid any malfunctions.
3
Re t the co ee bean hopper lid.
8.10 Closing the Upper Lid
After re lling and during normal operation the upper safety lid
must always be  tted and locked using the special key, in order to
prevent access to unauthorised people.
1
In order to lock the upper lid (1), place and close it using the
special supplied key.
8.11 Electrical Connection
This operation must only be performed by special-
ist technical personnel or by the service provider.
The machine is designed to work with single-phase voltage
matching the rating indicated on the identi cation plate (section
1.4 "Machine Identi cation").
Before plugging in the machine, make sure that the power button
is switched to "0".
The Service Provider makes and is responsible for the electrical
connection of the machine.
The machine should be connected to the mains using the plug
installed on the power cord, in accordance with:
The Laws and Regulations in force at the place and time of
installation;
The information shown on the technical speci cations plate
on the side of the machine.
Warning: The electric socket which the appliance
is connected to must be easily accessible by the
user, in order to allow it to be easily disconnected from
the mains when necessary.
It is forbidden to:
Use extensions of any kind.
Replace the original plug.
• Use adapters.
8.12 Setting the Language (Upon First Use)
At  rst start up, the machine requires you to select and store the
desired language for the display of messages. This allows you to
adjust the parameters of the beverages to the typical parameters
of the country where the machine is used.
LANGUAGE
ITALIANO
ENGLISH
DEUTSCH
FRANÇAIS
1
Select the language by pressing the " " (24) or " "
(20) button.
2
Press the
" " button (18)
to store the language.
3
The machine starts the system warm-up.
Seitenansicht 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare